<sup id="0ou0c"><delect id="0ou0c"></delect></sup><strike id="0ou0c"><table id="0ou0c"></table></strike>
  • <del id="0ou0c"><sup id="0ou0c"></sup></del>
  • Green matte table mat-YY-A1001
    • Green matte table mat-YY-A1001

    Green matte table mat-YY-A1001

    Green environmental protection, high temperature resistance, no discoloration at 300 ℃, no combustion at 400 ℃, low temperature resistance - 30 ℃ - 70 ℃, no decomposition

    technical parameter

    ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ??

    Surface resistance

    106-109Ω

    Volume resistance

    105-108Ω

    hardness

    70-75

    Wear rate

    < 0.02g/cm2

    Dispersion time

    < 0.1s


    Common specifications
    ? ??

    ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?

    surface treatment

    亞光Dull/光面(亮光)glossy/防滑Anti slip/花紋Pattern

    Dimension (L x W)

    10mx1.2m、10mx1.0m、10mx0.9m
    ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 10mx0.8m、10mx0.7m、10mx0.6m

    colour

    Green / black, blue / black, gray / Black


    Yellow / black, black / black, white / Black


    thickness

    1.0mm,2.0mm,3.0mm,4.0mm,5.0mm



    Friendly reminder:


    ? ?
    ? ? ? ? ? ? ? ? ? ? ? ?
    ? ? ? ? ? ? ? ? ? ? ??

    It can be customized according to customer requirements (length, width, thickness, color, etc.).

    The company's anti-static rubber plate (table mat and floor mat) adopts pure high-quality rubber. We promise that it will never contain secondary rubber, waste rubber, recycled rubber and plastic. You can cut and proofing for free.

    The product has passed the SGS test, meets the ROHS standard, and the halogen meets the standard.



    Application of antistatic rubber plate

    ? ?

    Static conductive and anti-static rubber plate (table mat and floor mat) is applicable to aerospace, national defense, coal mine, black powder, pyrotechnic, electric initiating explosive products, ammunition charging assembly, civil blasting equipment, fireworks and firecrackers, electronic components, electronic instruments and meters, liquefied petroleum gas tank station, electronic semi conductor devices, electronic computers Electrostatic conductive rubber plate, anti-static rubber plate floor and worktable are paved in the production workshop and warehouse of electronic communication equipment, integrated circuit microelectronics industry and other industries in order to eliminate the accumulation of static electricity in human body and environment and prevent static hazards and accidents.


    The function of paving static conductive and anti-static rubber plate (table mat, floor mat) ground and worktable is to effectively leak the static electricity on human body, tooling, equipment and materials into the ground and eliminate the static electricity harm to human body and environment. Prevent fire and explosion accidents caused by electrostatic discharge in the production site of flammable and explosive products; Prevent breakdown damage of components and finished components caused by electrostatic discharge in the production site of electronic products; Relieve the electrostatic shock and mental burden caused by electrostatic discharge.



    Laying of anti-static rubber plate

    ? ?There are two laying methods of static conductive and anti-static rubber plates (table mat and floor mat), floating laying and pasting. Floating paving is to directly lay 2-5mm thick rubber plate on the ground, which is flexible and simple, but the gap at the joint of rubber plate is easy to accumulate dust. Pasting is to paste the 2-5mm thick rubber plate on the ground with electrostatic conductive rubber liquid. The gap at the joint of rubber plate can be 1.2x1000x10000mm thin rubber plate, cut into 30-50mm wide rubber strips with a paper cutter, brush and paste the electrostatic conductive rubber liquid on the gap surface at the joint of rubber plate. The straight edge of 5mm thick rubber plate can also be cut into positive and negative slopes with a paper cutter (or special cutter), roughened slightly, and coated with electrostatic conductive rubber solution for lap bonding.

    Requirements for base course ground

    ? ? Wooden floors, asphalt floors, floors of buildings on the second floor and above belong to insulated floors. Copper sheets must be pasted on the ground before paving rubber plates. Copper sheets are generally made of thin copper strip profiles. Copper sheets are pasted on the ground into a rectangular grid intersecting horizontally and vertically. The size and quantity of copper sheet pasting spacing can be determined according to the needs of their respective production workshops and warehouses, Fix the attached copper strip and reliably connect it with the electrostatic grounding branch line (or trunk line) to provide electrostatic leakage channel. Non insulated floors such as cement floor and terrazzo floor on the first floor can be paved directly on the ground without installing copper sheets.

    Precautions for sticking rubber plate to the ground

    1. The ground and rubber plate shall be free of dust, oil stain and moisture, and must be clean and dry;

    2. Before pasting, clean the pasted surface with 120 ° gasoline, dry it, and then apply rubber liquid;

    3. The ambient temperature shall be 25 ° c-42 ° C, and the relative humidity shall not be higher than 60%, which is generally good;

    4. The adhesive surface of rubber plate shall be roughened slightly with coarse sand wheel, coarse sand paper, wood file, etc. (the edge of 30-50mm adhesive surface must be roughened);

    5. The rubber liquid must be brushed twice on the pasted ground and rubber plate surface with a brush. The first time is dried for 20-30 minutes, and the second time is dried until it is slightly sticky;

    6. If the rubber solution is too thick and inconvenient for construction, toluene can be added in the proportion of 10-20% of the rubber solution, diluted and stirred evenly before use

    7. After the rubber plate is pasted on the ground, it shall be rolled with a round roller weighing more than 5kg for more than 5 times;

    8. Pay attention to ventilation and fire prevention during construction;

    9. During the use of rubber plate floor, if it is found that it is dehydrated and crimped due to mechanical operation, the above pasting method can be used for subsidy and repair.



    Resistance measurement of anti-static rubber plate ground


    The measuring instrument is an insulation resistance tester, with DC open circuit voltage of 500V and short-circuit current of 5mA. The measuring electrode is made of copper or stainless steel into a cylindrical standard electrode with a diameter of 60 ± 2mm and a weight of 2 ± 0.2kg. The measuring electrode must be treated against oxidation.

    1. Place two measuring electrodes 1m apart on the ground, connect the two wiring terminals of the instrument with the electrodes respectively, and measure the resistance between the electrodes;

    2. Place a measuring electrode on the ground, connect one terminal of the instrument with the electrode, and connect the other terminal to the grounding network of the workshop and warehouse (if there is no grounding network, it can be connected to the water filled tap water pipe), and measure the resistance to ground at this point;

    3. At least 5 measuring points shall be selected for each workshop and warehouse. The measuring points shall be selected at the place where production workers operate and often walk, and shall be 1m away from the grounding body;

    4. The arithmetic mean value shall be taken for both the inter electrode resistance value and the polar resistance value;

    5. The ground resistance of electrostatic conductive rubber plate is ≤ 5x104 Ω or 5x104-106 Ω; The ground resistance value of anti-static rubber plate shall be in the range of 106 Ω - 109 Ω.


    常見問題1 2 3
    你可能還喜歡
    • Green matte table mat-YY-A1001

      Green matte table mat-YY-A1001

    • Matte table mat-YY-A1001

      Matte table mat-YY-A1001

    • Matte table mat-YY-A1001

      Matte table mat-YY-A1001

    • Apple green matte table mat-YY-A1001

      Apple green matte table mat-YY-A1001

    • Gray matte table mat-YY-A1001

      Gray matte table mat-YY-A1001

    • Blue matte table mat-YY-A1001

      Blue matte table mat-YY-A1001

    Anti static experts have focused on the R & D and production of anti-static products for 29 years
    Scan QR code for more information
    National hotline:
    Tel: 0576-87071888
    0576-87071889
    Mobile: 136 6168 8095
    mail box:
    zxl@zjyiyuan.cn
    zj@zjyiyuan.com

    本站使用百度智能門戶搭建 管理登錄
    主站蜘蛛池模板: 日韩欧美在线综合网高清| 电影天堂2018| 最近中文字幕高清2019中文字幕 | 一边摸一边叫床一边爽| 香蕉免费在线视频| 日本高清免费中文在线看| 啊灬啊灬用力灬别停岳视频| 久久青草精品38国产免费| 青苹果乐园在线高清 | 日本边添边摸边做边爱的网站| 伊人久久大香线蕉综合影院首页 | 橘子没熟svk| 出轨的女人2电影| 天天久久影视色香综合网| 日出水了特别黄的视频| 别揉我奶头~嗯~啊~视频在线观看| 一级毛片一级毛片一级毛片aaav| 特黄特色大片免费播放器999| 国产精品第八页| 久久99热只有频精品8| 第一福利官方导航| 国产毛片哪里有| hxsp777.com| 日本牲交大片免费观看| 六月婷婷网视频在线观看| 欧美一级黄视频| 好男人社区在线www| 亚洲国产欧美目韩成人综合| 韩国特黄特色a大片免费| 怡红院在线观看视频| 亚洲欧美精品伊人久久| 黑人巨大videos极度另类| 成人免费视频小说| 亚洲中久无码永久在线观看同| 色五月在线视频| 国产精品日韩专区| 一二三四日本高清社区5| 欧美婷婷六月丁香综合色| 国产亚洲成av人片在线观黄桃| juliecasha大肥臀hd| 欧美xxxx喷水|